-
- About WT Henley
- Products
- Cable Accessories
- Polymeric Insulators
- Low Voltage Fusegear
- Jointing Tools
- Jointing Accessories
- LV Underground Distribution
-
LV/MV Mechanical Connectors
- LV Service Straight
- LV Service Straight (Pre-Insulated)
- LV Service Branch
- LV Mains Service Branch
- LV Mains Straight
- LV Mains Branch
- LV Terminations (Lugs)
- LV Terminations (Connectors)
- Railway Approved Connectors
- LV/MV Mains Straight
- LV/MV Mains Branch
- LV/MV Terminations (Lugs)
- LV/MV Stop Ends
- LV/MV (North America)
- Neutral Earth (CNE)
LVS1, 2 & 3 aluminium
Designed to provide the end user with a cost effective method of jointing all types of LV cables using a single range of profiled mechanical connectors.
DatasheetMB21/1 brass (side entry)
Designed for service branch connections on stranded or solid cable. The connector is manufactured in copper alloy for suitability of jointing both copper and aluminium conductor cores.
MB21/1/SHR brass (side entry)
The MB21/1/SHR mechanical connector has a factory fitted lower polypropylene shroud with a 'snap on' upper to fully insulate the assembled connector.
MB21/3, MB21/3/SHR Connector
The Sicame MB21/3 mechanical connector is designed for service branch connections on stranded or solid cable. The connector is manufactured in copper alloy for suitability of jointing both copper and aluminium conductor cores and comes complete with shear off 3mm AF grubscrews. The Sicame MB21/3/SHR mechanical connector has a factory fitted lower polypropylene shroud with a snap on upper to fully insulate the assembled connector.
MB21/1A hybrid (side entry)
Designed for service branch connections on stranded or solid cable. The aluminium connector yoke is electro-tinned as standard and is supplied with brass grub screws making it suitable for jointing both copper and aluminium conductor cores.
MB21/1A/SHR hybrid (side entry)
The MB21/1A/SHR mechanical connector has a factory fitted lower polypropylene shroud with a 'snap on' upper to fully insulate the assembled connector.
MB22/1, 22/2 & 22/3 brass (side entry)
Designed for service branch connections on stranded or solid cable cores. The connector is manufactured in copper alloy for suitability of jointing both copper and aluminium conductor cores.
P1 aluminium
A well established multi-purpose service connector for branch or straight-through connections, used extensively in general service applications, including street lighting.
P3, 4, 5, 6, 7, 8 & 9 + (H) aluminium
The 'P' and 'P(H)' range of connectors provides a well established method of connecting service cables to solid sector aluminium mains cables.
_aluminium.png)
SS35/4 fully insulated, insulation piercing
Specifically designed to improve the level of safety during live jointing by eliminating the need to remove the core insulation.
UB2/1, 2/2, 2/3, 2/4 & 2/5 (heatshrink section)
Designed specifically for use with polymeric heatshrink insulation materials. When fully assembled the connector forms a smooth, contoured profile, free from projections and sharp edges, allowing the insulation to shrink evenly around the connection. The connector is simple to fit and the shear head screw system ensures that the correct clamping pressure is applied. A consistent connection is achieved without the use of specialised tooling.
US1, 2 & 3 aluminium
Designed to connect stranded circular or sector shaped services to three or four core stranded sector shaped mains conductors.
US5 aluminium
Designed to connect stranded circular copper services to either three or four core sector shaped stranded aluminium mains conductors.
WS2 aluminium
Designed to accommodate solid or stranded service conductors to a maximum of 95mm², from four-core stranded sector shaped mains conductors in the range 120-185mm².
WS3 aluminium
Designed to accommodate solid or stranded service conductors to a maximum of 95mm², from four-core stranded sector shaped mains conductors in the range 240-300mm².
WS5 aluminium
Designed to accommodate solid or stranded service conductors to a maximum of 95mm², from four core stranded sector shaped mains conductors in the range 400-500mm².
LVMS1, 2 & 3 aluminium
Designed to provide the end user with a cost effective method of jointing all types of LV cables using a single range of profiled mechanical connectors.
MB21/1 XL brass (side entry)
Designed for branch connections on stranded or solid cable. The ferrules are manufactured in brass for suitability of jointing both aluminium and copper conductor cores.
MB21/1A XL (side entry)
Designed for double service branch connections on stranded or solid cable. The ferrules are manufactured in aluminium alloy (tinned) for suitability of jointing both aluminium and copper conductor cores.
PCS1/1, 1/2 & 1/3 insulation piercing
Designed for live jointing, and offers an improved level of safety together with a convenient and reliable method of connecting most service cables in common use to three or four core solid aluminium mains cables. The connector is suitable for either single or double service configurations.
PCS2/1, 2/2 & 2/3 insulation piercing
Designed for live jointing, and offers an improved level of safety together with a convenient and reliable method of connection service cables to three core solid aluminium M.I.N.D. paper insulated mains conductors (CONSAC). The connector is suitable for either single or double service configurations.
US6, 7 & 8 aluminium
Designed for connecting solid circular aluminium and stranded copper service cables (to ESI 09-7) to stranded, paper insulated lead sheathed mains cables (to BS 6480). It is particularly suitable for connecting metric service cables to existing mains cables in imperial sizes, in the ranges given above. The connectors may be used on both copper and aluminium cables.
WS4 aluminium
Designed to accommodate a double service configuration to a maximum of two 95mm² stranded conductors, off four-core stranded sector shaped mains conductors in the range 240-300mm².
