-
- About WT Henley
- Products
- Cable Accessories
- Polymeric Insulators
- Low Voltage Fusegear
- Jointing Tools
- Jointing Accessories
- LV Underground Distribution
-
LV/MV Mechanical Connectors
- LV Service Straight
- LV Service Straight (Pre-Insulated)
- LV Service Branch
- LV Mains Service Branch
- LV Mains Straight
- LV Mains Branch
- LV Terminations (Lugs)
- LV Terminations (Connectors)
- Railway Approved Connectors
- LV/MV Mains Straight
- LV/MV Mains Branch
- LV/MV Terminations (Lugs)
- LV/MV Stop Ends
- LV/MV (North America)
- Neutral Earth (CNE)
JTN/1 Mini-Hepwedge Core Separator
Designed to aid the separation of cores during jointing, these wedges are moulded in nylon to resist detrimental wear at the tip during normal use. The smooth surface of the material ensures minimal damage to the core insulation, and they have been designed to reduce the risk of displacement whilst located between the cable cores.
DatasheetJTN/2 Hepwedge Core Separator
Designed to aid the separation of cores during jointing, these wedges are moulded in nylon to resist detrimental wear at the tip during normal use. The smooth surface of the material ensures minimal damage to the core insulation, and they have been designed to reduce the risk of displacement whilst located between the cable cores.
JTN/3 Maxi-Hepwedge Core Separator
Designed to aid the separation of cores during jointing, these wedges are moulded in nylon to resist detrimental wear at the tip during normal use. The smooth surface of the material ensures minimal damage to the core insulation, and they have been designed to reduce the risk of displacement whilst located between the cable cores.
JTN/4 Hepnyf Hack-Knife
The Hepnyf was originally developed for stripping the lead sheath from PILC cables; more recently it has found widespread application in the removal of the bedding compound from Waveform CNE cables, without damage to the soft aluminium neutral earth wires.
JTN/4A Hepnyf Hack-Knife with Rubber Grip
The Hepnyf was originally developed for stripping the lead sheath from PILC cables; more recently it has found widespread application in the removal of the bedding compound from Waveform CNE cables, without damage to the soft aluminium neutral earth wires.
JTN/5 Belling-Tool for Cable Sheaths
The Hepnyf was originally developed for stripping the lead sheath from PILC cables; more recently it has found widespread application in the removal of the bedding compound from Waveform CNE cables, without damage to the soft aluminium neutral earth wires.
JTN/6 Mini-Hepnyf Hack-Knife
The fully insulated Mini-Hepnyf has been developed to compliment the standard Hepnyf and has a particular beneficial application in the stripping of lead sheath from small PILC service cables, and the removal of mastic bedding on all types of waveform cables.
JTN/6A Mini-Hepnyf Hack-Knife with Rubber Grip
The fully insulated Mini-Hepnyf has been developed to compliment the standard Hepnyf and has a particular beneficial application in the stripping of lead sheath from small PILC service cables, and the removal of mastic bedding on all types of waveform cables.
JTN/7 Hepsaw Hack-Knife
The primary application of the 'Hepsaw' is for the removal of re-enterable resin from LV or MV cable joints..
JTN/7A Hack-Knife with Rubber Grip
The primary application of the 'Hepsaw' is for the removal of re-enterable resin from LV or MV cable joints.
JTN/8 Holding Tool for 'HSC' Product
The 'JTN/8' Insulated Holding Tool has been designed as an aid for the jointing of the 'HSC435 SED/x' range of insulated in-line service connectors.
JTN/9 Holding Tool for 'NMS' Product
The 'JTN/9' Insulated Holding Tool has been designed as an aid for the jointing of the 'NMS' range of insulated mains service connectors
JTN/9A Holding Tool for 'NMS' Product
The 'JTN/9A' Insulated Holding Tool has been designed as an aid for the jointing of the 'NMS' range of insulated mains service connectors
JTS/1 Cable Armour Bond Tensioning Tool
This tool is designed for use with the Armour Bond system when the continuity bonds are to be secured with tension-straps (HBT tension-strap fixing).
JTS/2 Lightweight Tensioning Tool
This device is designed for use with the Consumers Earth Bond system. An efficient contact between the cable earth sheath and the consumers earth point is achieved by tensioning a copper strap around the sheath with the aid of the tool
JTS/21 Insulated Nut Runner (13mm A/F)
The JTS/21 Insulated Nut Runner is designed as jointing aid and has an insulated handle for the torque tightening of steel 13mm A/F nuts. The jointing tool can be used as an aid during the assembly of the 'LVS', 'LVMS' or '
JTS/3 Lifting Keys
The JTS/3 range of Lifting Keys has been designed to free road level inspection covers and assist in their lifting under adverse conditions such as the ingress of dirt or grit, rusting, frost and ice, or impact from heavy vehicles.
JTS/4 Jointers Piercing Tool
The Piercing Tool is hand-operated and designed to cut holes in metal strip on site. Each tool is supplied with a detachable holding handle and operating spanner and is suitable for use on steel, copper and aluminium.
